How To Oil A Spinning Reel?

Get ready for a reel refresh with our guide on “How to Oil a Spinning Reel.” Imagine it as a mini spa day for your trusty fishing sidekick – the spinning reel. We’re about to unfold uncomplicated steps that not only extend the life of your reel but also make it operate seamlessly.

It’s like giving your gear a little TLC to ensure it’s always ready for action. Whether you’re a seasoned angler with countless adventures under your belt or a newcomer eager to explore the fishing world, mastering the art of oiling your spinning reel is a simple yet impactful skill.

So, let’s jump into these hassle-free steps and guarantee your reel is primed for every fishing escapade that comes your way!

How To Oil a Pflueger Spinning Reel?

This step-by-step guide will guide you through the process of oiling a spinning reel. The following steps should be followed

You can easily oil your own fishing reel

Spinning reels are low-maintenance – you don’t need to clean or oil them much. They’re like amazing machines, fitting together perfectly. You only need to take them apart a little bit to add some oil.

Taking apart and putting together most fishing reels is a straightforward task that you can do in a few minutes. On the other hand, if you pay someone else to do it, it might cost a lot of money, and there’s no assurance that it will be done right.

Material Required

You’ll need very basic supplies to clean, oil, and lubricate your fishing reel. Among them are:

  • Ensure good lighting in your workspace.
  • Have grease and oil ready for the reel, or opt for 3-in-1 oil.
  • Use isopropyl alcohol for cleaning purposes.
  • Keep paper towels and Q-tips on hand.
  • Depending on the reel, have a screwdriver available.

Consider using widely available 3-in-1 oil for lubricating metal parts, eliminating the need for separate oil and grease. Explore Reel Oiling Kits on the market, some of which require no additional equipment or only a small amount.

Steps For Oiling The Spinning Reel

Here are the steps for oiling a spinning reel:

1. Oil and clean the bail first

When you flip the bail, make sure it’s open. Clean away any dust, dirt, or rust from around it. The bail connects with the assembly where you put oil into the flipping mechanism.

After the oil has soaked in, flip the bail back and forth a few times. Use a paper towel to soak up any extra oil.

2. For the outside of the handle, repeat the process as follows

Place a drop of oil inside the turning mechanism of the knob. Rotate the knob to ensure the oil goes in. Wipe away any extra oil.

3. Spool removal

When positioning the reel, make sure the spool faces upward. To adjust the drag, turn the knob at the top of the spool counterclockwise to unscrew it. Remove the knob first, then the spool. Some reels may feature a button at the back to facilitate spool removal.

Spool removal

4. On both sides, clean the spool over and inside

After checking the spool and knob for dirt, clean them. Use a Q-tip soaked in alcohol to clean the inside of the device.

clean the spool over and inside

Be especially careful when dealing with a delicate spring, handling its internal parts with care. Make sure the drag adjustment knob, which connects to the spool, is also clean.

5. Ensure that the spool and knob are greased

Ensure the rotor is lubricated where the spool passes through it. Apply grease to the point where the knob meets the spool. Grease should also be applied to the spot where the knob connects with the spool.

Use grease sparingly to prevent dirt from absorbing it and causing movement issues. Any excess grease should be removed.

spool and knob are greased

6. Clean the rotor assembly

Use a Q-tip on all sides of the rotor shaft. If there are any residues on the shaft or within the assembly, use a Q-tip to remove them.

Clean the rotor

7. Rotor shaft oiling

Wipe away excess oil by using a cloth to clean the shaft. Apply a drop or two of oil on it. If the shaft is connected to the assembly, consider adding a bit of grease for good measure.

Rotate the handle gently to let the grease settle in. Use a paper towel and a Q-tip to remove any excess oil and grease. Be cautious not to pour excess oil down the shaft, as it could damage the anti-reverse function.

8. Reattach the spool

Make sure all parts are back in their original positions, and the shaft is adjusted correctly. Insert the spool into the shaft and place the knob on top. Tighten the knob as much as possible by turning it clockwise. If you want to make adjustments later, you can do that as needed. Confirm everything is working correctly by rotating the handle.

Reattach the spool

9. As a final step, grease the inside of the assembly where the handle meets

Turn the handle counterclockwise to unscrew the cap. Then, gently rotate the handle to remove it. Wipe clean all inner parts that are now visible, removing any grease or dirt. For some reels, you may need to use a screwdriver to remove the handle by taking out a few screws.

10. The rotating mechanism should be greased

Ensure the handle supports the assembly by applying grease to the bearings and gears inside. Additionally, apply a small amount of grease inside the screw cap’s hole and on the inner wall of the screw cap. Remove any excess grease.

11. Assemble the handle again

First, ensure the screw cap is tightly secured. Turn the handle so that it firmly fits into the assembly on the other side, then reattach it. Confirm that everything is functioning properly by turning the handle.

12. Paper towels should be used to clean the entire reel surface:

Remove any remaining grease, oil, or alcohol. Rotate your reel and feel its agility and smoothness for the first time. Your task is complete!

Here are some key precautions

Avoid greasing or applying chemicals to plastic components inside the reel, as it may lead to more negative effects than positive ones.

Don’t forget:

Maintaining your reel is straightforward: disassemble, clean, oil, and reassemble each part before moving on to the next. If you’re unsure, seek guidance from someone experienced to learn and master these steps.

Some reels may have additional, less intuitive steps. In these cases, refer to the product manuals for guidance. When uncertain, seek advice from experienced individuals.

Benefits of Oiling The Spinning Reel

Oiling your spinning reel has some good perks:

  • Smooth Operation: It helps the parts move easily without getting stuck.
  • Lasts Longer: Regular oiling makes your reel live longer because it avoids wear and tear.
  • No Rust: Oils stop rust, which is great, especially if you fish in salty water.
  • Stays Cool: The right oil helps your reel not get too hot during long fishing sessions.
  • Works Better: A well-oiled reel performs better – casting and pulling in fish becomes easier.
  • Not Noisy: If your reel is oiled, it won’t make annoying sounds, so you won’t scare away fish.
  • Easy to Keep Up: Oiling makes it easier to take apart, clean, and put your reel back together.
  • Saves Money: Regular oiling avoids big repairs, saving you money by keeping your reel healthy.

So, oiling your reel regularly is like giving it a little love to make sure it works great every time you go fishing!

Are Spinning Reels Needed to be Oiled?

Yes, you should definitely consider oiling your fishing rod, as many anglers inquire about this frequently. The simple answer is that depending on the model, you may need to oil your fishing rod right after purchasing it, as some reels are not initially lubricated.

The crucial components of reels are the moving parts, and there are quite a few of them. Utilizing oils with anti-corrosion properties can significantly lower temperatures and friction on fishing reels, preventing corrosion from damaging these parts. Before applying oil, ensure that your spinning reel is thoroughly cleaned.

Dirt or debris mixed with oil can cause severe damage to the reel, as they may rub against sensitive parts during use. Interestingly, oil can harm dirt more than water does. To keep your reel in good condition, it’s crucial to clean it with a soft cloth and avoid using harsh detergents or chemicals.

When cleaning your reel, it’s highly recommended to use specialized products. While these products might come with a slightly higher price tag, they can save you much more in potential repair costs.

Conclusion:

In the end, giving your fishing buddy, the spinning reel, a little spa treatment with proper oiling is like giving it some love. Whether you’re a pro or just starting, learning to oil your reel is an easy and helpful skill. The steps are straightforward, making sure your reel is ready for any fishing adventure.

By taking it apart, cleaning, oiling, and putting it back together, you not only make it last longer but also work better. Remember, using good cleaning and oiling stuff might cost a bit more, but it saves you money by avoiding big repairs. So, keep your reel happy by oiling it regularly for awesome fishing trips!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top