How To Put Line On a Pflueger Spincast Reel?

Getting your fishing gear ready is important, and knowing how to put line on a Pflueger Spincast Reel is a key skill for successful fishing.

Doing this right makes casting easier and helps avoid problems like tangled lines. In this guide, we’ll go through the steps in a simple way, making sure your Pflueger Spincast Reel is all set for a great fishing experience.

Whether you’re new to fishing or have been doing it for a while, we’ll give you clear instructions to set up your gear easily and confidently.

Some Factors To Keep In Mind

Choosing the right fishing line is important, and it depends on where you’re fishing. Here are three types:

1) Monofilament Lines: Good for live bait, jigs, or floating baits. They stretch a bit, making them effective for fishing.

2) Fluorocarbon Lines: Very thin and almost invisible underwater, great for clear and calm water. Can be used for various fishing techniques.

3) Braided Lines: Made by combining multiple lines, they are heavier and sink slowly. They are visible in clear water, so be careful. They’re good for casting far.


Tension is Key: Hold the line with your thumb and forefinger to keep the right amount of tension. If it’s too loose, it can cause problems.

Different Lines, Different Tensions: The type of line you use affects how much tension you need. Monofilament lines need less tension than braided or micro-filament lines.

How To Put Line On a Pflueger Spincast Reel?

Using spincast reels isn’t difficult, but before you begin, it’s essential to understand how to spool the line onto them. The following steps can serve as a helpful guide, especially for those who are using a spincast reel for the first time.

1. Take off the cover from the reel. The spincast reel, in addition to having a closed face, has a cover that needs unscrewing and removing. Some reels use a simple notch and pin to keep everything together, while others use a screw.

2. Get rid of any old line from the reel, if there is any. Taking off just enough of the line will let you add a sufficient amount of new line for longer casting. If you want to save money, you can leave the old line as backing.

3. Ensure the new line is tied to the spool. Thread the line from the end of the rod through the hole in the cover. Lastly, tie it onto the reel’s spool.

A useful and easier approach might be running the line from the tip to the handle using the rod guides. Make sure the knot is tight by creating an arbor knot. If you still have the old line as backing, it’s a good idea to tie a nail knot or two clinch knots.

4. Place the reel’s cover back on. While putting the cover back on, keep the line taut. Check to ensure the reel cover is not pinching the line. After reattaching the cover, pull the line tight.

5. Reel in the new line onto the reel, starting with the filler spool. Unwind the line in the same direction it went onto the reel to ensure it comes off the spool smoothly and prevents twisting.

Begin reeling in the new line onto the reel while holding the old one tightly with one hand. It’s crucial to maintain tension on the line as it goes onto the reel to ensure it stays tight. Loose lines can tangle and create casting issues.

6. Fill the spool up to the lip, leaving about 1/8 inch space. Avoid overloading the reel with too many lines. If you want to check, consider taking off the cover during spooling. When replacing the line, be careful not to pinch it when taking it off.

7. Utilize the line guides when running the line and attaching the lure. If you didn’t have the chance to run it through the guides before spooling a new line, now you can spool the line through the rod guides. At this point, you’re ready to start fishing.

For better casting, it’s recommended to pinch the line between your fingers while holding the reel. This way, you can reel in the line tightly. This step is particularly crucial when using a light lure that may not exert enough tension. Maintaining tension can be aided by fish pulling against it or when using crankbaits.

8. After putting on the line, check for any twists. Boats provide the option to trail the line behind them as you idle. Once you finish reeling in the line, ensure there are no snags. A flat surface is also an option; slowly reel the line back onto the reel, making sure not to leave anything at the end.

While it might seem complicated, following each step one by one makes spooling your spincast reel easy. To minimize line snags on your reel, including spincast reels, it’s crucial to put the line on the spool correctly. This not only contributes to a more successful and trouble-free fishing experience but can also increase your chances of catching more fish.

Check and observe the spooling on both sides of the supply line to ensure proper operation. It’s important to remove the line from the side with the least noticeable coiling. When the line reaches the reel, gently apply pressure.

The process involves removing the hood, running the line through the hole, tying it to the arbor, snipping off excess, and replacing the hood. Now, you’re ready to go fishing.

How to Put New Line on a Baitcaster Reel?

Similar to the spinning reel, but with added ease, follow these steps:

  • Begin by threading the line through the bottom eyelet on your rod.
  • Thread the line through the line guide on the reel.
  • Pass the line through the holes in the spool arbor, ensuring it wraps around the spool.
  • Secure the line with an arbor knot and trim off any excess from the knot.
  • Before cranking the reel, ensure the line and the rod are straight.
  • Tighten the drag slightly and maintain a taut line before cranking.
  • As you start cranking, apply firm pressure to keep the line tight, ensuring even distribution.
  • Keep spooling until the top line layer is approximately 1/16 inch from the spool edge. Avoid overfilling the spool.
  • That’s it! Now, you’re ready to go fishing with a properly spooled reel.


In conclusion, mastering the process of putting line on a Pflueger Spincast Reel is a crucial skill for anglers of all levels. This guide simplifies the steps, making the setup process easy to understand and follow.

Whether you’re new to fishing or a seasoned angler, the clear instructions provided ensure your Pflueger Spincast Reel is ready for a successful and enjoyable fishing experience.

Additionally, considerations like choosing the right fishing line based on water type and maintaining proper tension are highlighted, adding valuable insights to enhance your fishing endeavors.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top