How To Put Line On a Spinning Reel Without Twist?

Fishing is a fantastic way to unwind and connect with nature, but nothing can spoil the excitement faster than a twisted fishing line on your spinning reel.

Those annoying twists not only make casting difficult but can turn a relaxing day by the water into a frustrating experience. However, fear not! In this beginner-friendly guide, we’ll walk you through the straightforward steps of putting line on your spinning reel without the hassle of twists.

With these simple tips, you’ll be well on your way to enjoying smooth, trouble-free casts and increasing your chances of landing that big catch. So, let’s dive in and discover how to put line on a spinning reel without twist and ready for action, ensuring every fishing trip is a success!

How To Put Line On a Spinning Reel Without Twist?

The following steps will help you avoid this while lining a spinning reel.

1. Unspool the fishing line counterclockwise from the fishing line spool

To avoid tangled lines, place the spool flat and check that it unwinds in a counterclockwise direction. This is crucial for preventing twists in the fishing line.

line can unspool counterclockwise

Spool the line onto the reel in a clockwise direction during this step. When using a manufacturer’s spool, the line already has a natural curve, so there’s no need to wind it against that natural curve.

2. Tie the fishing line to the fishing rod’s bottom eye

Just like a spinning reel pulls in the line when threaded through the bottom eye of a spinning rod, the same happens when you cast a spinning reel while fishing.

You don’t have to thread the fishing line through all the eyes of the rod when stringing a fishing reel. It’s simpler to just pass the line through the first eye of the fishing rod, even though it takes a bit more time.

initially pull the line onto the spool

3. Make sure the bail is opened

It’s surprising how many times I’ve wrapped the line around the reel spool without opening the bail.

Either the knot had to be undone or the line was cut, and then the knot had to be retied. The reel won’t work unless the fishing line goes under the bail.

4. Wrapping the Spinning Reel Spool with a Knot

If you ask different anglers about the best knot to tie the line onto the spool of a fishing reel, you might get different answers. Some might suggest an overhand knot is okay, while others insist on using the arbor knot. It really depends on who you ask!

After tying your preferred fisherman’s knot, make sure to clip the tag end of the fishing line. Leaving excess line at the tag end can lead to fishing difficulties, so it’s essential to trim it.

tie the line onto the spool of the fishing reel

5. Reel and bail are closed

The type of fishing line you’re using can make things a bit tricky. Unlike other lines, braided fishing lines have a tendency to spin around the reel spool instead of smoothly winding onto it.

To prevent braided lines from spinning around the reel, you might need to use a monofilament backing. I suggest using a double uni knot when connecting a monofilament line with a braided line.

While reeling, pinch the line between your fingers to create a natural resistance. It won’t cut into your fingers, but it’s enough to make sure the fishing line spools securely onto the reel.

bail are closed

6. Make sure your spinning reel isn’t overloaded

Unlike bait casters, there’s no specific limit to how many lines you can load on a spinning reel. After reeling in enough fishing line, aim to leave about 1/8th inch of space at the bottom of the spool.

Make sure your spinning reel isn't overloaded

I’ve been there too! Dealing with a bird’s nest of extra line on a spinning reel after the first cast definitely doesn’t make for a fun fishing trip. That’s why spooling your reel with the correct amount of line is incredibly important.

For more information, read this article how much line to put on a spinning reel?

7. Tie a lure to the line

Once you’ve loaded enough fishing line onto your spool, go ahead and cut it. If you haven’t already, thread the line through the remaining eyes of the rod. Now, you’re all set to head to your favorite fishing spot with your preferred lure!

Tie a lure to the line

8. Use your spinning reel and rod to catch fish

Now, it’s time to plan your next fishing trip and hit the waters with your spinning reel loaded with line and a lure attached. With everything set up, casting becomes a breeze, and you can enjoy your fishing without the worry of tangled lines. Happy fishing!

What Causes Line Twist?

fishing line getting tangled up

Fixed spool reels are prone to causing line twists. When loading onto the spool, the line has to turn sideways as it approaches the reel, causing the potential for twists.

Achieving a right-angle turn for a line without causing twists is mechanically impossible. Every time the reel is loaded, the line naturally creates thousands of twists for each turn on the spool.

Loading a fixed spool reel correctly is crucial for minimizing line twists. Even a few catches, especially when using the clutch, can cause rapid twisting of the line. This twisting occurs as the clutch is engaged and disengaged, particularly when there’s only a little line left on the spool.

Professional anglers often resort to backwinding instead of relying heavily on the clutch when playing a fish. While it’s impossible to completely eliminate line twisting, it can certainly be minimized through careful handling and technique

How Can You Limit Line Twist?

Line twist can be minimized by taking one of the following approaches:

  • Load fishing reels correctly to minimize line twists.
  • Use the clutch sparingly, especially when playing fish.
  • Consider using big pit reels for better line management.
  • Incorporate spin doctor leads regularly for improved casting and reduced line issues.

How Do I Stop Excessive Line Twist While Fishing?

Maintaining a fishing line in good condition with a brass swivel is a cost-effective and efficient solution. Line curling and twisting can occur for various reasons, not just during side casting. Properly using a swivel can swiftly address these issues and keep your fishing line in top shape.

Ensure the swivel is directly on the fishing line itself, irrespective of any rig or attachment. As the line passes through the rod runners, the first item attached should be a practical and compact swivel to keep it as small as possible.

Suggested swivel and line combinations:

  • No. 14 swivel – up to 5kg line
  • No. 10 swivel – up to 8-15kg line
  • No. 12 swivel – up to 5-8kg line
  • No. 8 swivel – up to 15-20kg line

While some fishermen might perceive these sizes as small, it’s important to note that they are crafted from brass wire, which is thicker than the nylon monofilament they’ll be paired with. As a result, they boast a higher breaking strain compared to nylon monofilament.

Contrary to the belief of many anglers, a larger swivel is often found to be less effective in practice. When using light lines or heavy swivels, achieving a free-spinning swivel eye becomes challenging, leading to twisting issues.

Issues arise when a swivel becomes entangled with algae or sand, or if it becomes difficult to turn due to corrosion. Adding a second swivel to the line in a way that restricts the rig’s action is not recommended, unless a swivel under the lead sinker is also attached.


In the final analysis, preventing line twists on a spinning reel is crucial for a successful fishing experience. The guide provides essential steps, from unspooling counterclockwise to using the right knots.

Proper swivel usage is emphasized to minimize line twists, and considerations such as clutch control and reel size are highlighted for effective line management

By following these guidelines, anglers can ensure smooth casting, avoid frustrating tangles, and increase their chances of a successful catch during their fishing trips.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top