How To Put Line On a Spinning Reel?

If you’re new to fishing, figuring out how to put line on a spinning reel might seem a bit puzzling. But fear not! This guide is here to make it simple. Putting line on your spinning reel is like giving your fishing gear a good foundation—it sets you up for success on the water.

In this guide, we’ll go through the basic steps, so you can spool your spinning reel without any fuss. From picking the right fishing line to making sure it’s all set up properly, we’ve got you covered.

So, whether you’re just starting out or looking to refresh your skills, let’s dive in and make sure your spinning reel is ready to roll for your next fishing trip!

Therefore, here is a detailed description of the topics mentioned below.

  • how to put a line on a spinning reel
  • how to line a spinning reel
  • how to string a spinning reel
  • how to put fishing line on a spinning reel
  • How to put new line on a spinning reel

To keep things straightforward and short, we’ve organized the steps and collected helpful tips from users like you. Our guide is put together using personal experiences and insights shared by others, ensuring a clear and concise resource for everyone.

How To Put Line On a Spinning Reel?

Completing the task swiftly and effortlessly is a breeze when you follow these instructions for spooling a reel.

1. Select a Fishing Line Type: Monofilament, Fluorocarbon, or Braided

Selecting the correct fishing line is crucial. For mono or fluoro lines, you can attach them directly to the spool using this method. To avoid the braided line from spinning on the spool, when using braided line, lay down thirty to sixty yards of monofilament line and then reel it around the spool.

fishing line

The FG Knot, though more challenging, offers superior strength, while the Double Uni Knot is quick and simple. Both are effective methods for joining braided to mono backing.

2. Under The Bail Arm, Slide The Line

Insure to close the bail. A closed bail turns your reel into a winding reel, not a casting one. Loop the line around the spinning reel spool by sliding it underneath the bail arm.

3. Spool The Reel With The Line Attached

Once you’ve tied the Arbor Knot to the spinning reel spool, pull the line up firmly. Knowing the Arbor Knot is all you need to connect the line to the spool.

Pull the line up nice and tight

4. Attach The Line To The Spool

Hold the filler spool with the assistance of a friend or family member, or utilize a fishing reel spooler if available. The center of the filler spool should be threaded with a pencil, and use your thumbs to maintain tension on the line.

Hold the filler spool

Continue winding the line onto the reel by steadily turning the handle until the spool is completely filled.

Determining the right amount of fishing line for the spool involves some judgment. If you load too little line, it can affect casting distance because the angles it has to cross become too sharp.

fishing line that needs to be loaded onto the spool

When you flip back the bail or reel in, coiled line may come loose, leading to tangles. To prevent this, pack the fishing line on the spool in a way that the lip of the spool and the wound fishing line are approximately 1/6th to 1/8th of an inch apart.

How To Line a Spinning Reel?

Spinning reels are a popular choice among anglers due to their widespread use. Their user-friendly design and simple maintenance make them an excellent option, especially for beginners.

Below, we present easy-to-follow steps on how to line a spinning reel without encountering any issues.

1. Begin by acquiring fishing line. For novice anglers, a 10-pound test line is recommended. Spinning reels can accommodate this type of spool as long as it meets the thickness requirements.

2. Secure the end of the line with a knot, and the Palomar knot is highly recommended for this purpose. It is not only robust but also easy to tie.

Tie the line at the end with a knot

3. Once you’ve tied the knot, spool the line onto the reel. Begin by threading the line through the hole at the top of the reel. Hold the reel parallel to the ground and ensure that the line is also parallel to it.

Spool the line onto the reel

Rotate the reel handle clockwise to wind the line onto the spool. Keep winding until the spool is fully loaded with line.

reel handle should be rotated clockwise

4. After spooling, pull the line tightly to ensure it’s securely in place. Trim the tag end of the line for a neat finish.

How To String a Spinning Reel

Rigging a spinning reel can be approached in various ways, providing flexibility for beginners to learn. People have different techniques for tying reels, with various knots being preferred by different anglers.

Lining up a spinning reel is quite straightforward, despite initial appearances. To string a spinning reel easily and efficiently, start by tying the line to the reel. There are multiple methods for stringing a spinning reel, as you might have heard.

This step-by-step guide breaks down the process of spooling a spinning reel. Selecting the right method can be a bit challenging, but in this article, we’ll explore various ways to string a spinning reel.

Stringing a spinning reel only takes a few minutes with this process. It’s based on my personal experience and insights gathered from others.

The steps below will guide you through stringing a spinning reel in only a few minutes.

1. Cut Out The Old Lines:

Before starting, it’s essential to remove the old line from the reel. You can do this by unscrewing and pulling off the reel cap.

2. Make Sure The Reel Is Clean:

To clean your reel, soak it in water. Ensure it is thoroughly dry before putting it back together.

3. Make a New Line

Secure one end of the new line around the eyelet on top of the reel. It’s crucial to leave enough slack in your line while reeling in fish to prevent it from pulling too tight.

new line around the eyelet

4. Attach The Line To The Reel

Wind the reel up, inserting the line into the reel spool. Ensure the knot is loose, and the line is tight for proper setup.

5. Secure The Knot

After tying your knot, pull the line against the spool to secure it.

Pull the line

6. Rotate The Spool

While holding the reel, twist the spool in a counterclockwise direction with your other hand. This action should loosen the line, allowing you to pull it off.

twist the spool in an anti-clockwise direction

7. Remove Excess Lines. 

Disassemble your spinning reel’s spool and trim off any excess line. This step prevents tangling and ensures you have the right amount of line at your disposal.

trim off any excess line

8. Attach The Line To The Reel

Wind up the reel and insert the line into the reel spool. It’s crucial to verify that the knot is loose, and the line is tight for a secure setup.

insert the line in the reel spool

9. Set Up Your Reel Again

You can now reassemble your reel. This simple process typically takes only a few minutes to complete.

10. Check Your Reel

After stringing the reel, it’s essential to check its alignment. If the reel is out of alignment with the rod, make the necessary adjustments for proper alignment.

How To Put Fishing Line On a Spinning Reel?

Before you start fishing, prepare your area and select a fishing line that meets your needs. Load the fishing line onto reels outdoors to prevent damage. If you want to learn how to put a fishing line on a spinning reel, follow the steps below to get started.

1. Attach the line to the fishing rod’s eyes

Begin by running the fishing line through the rod guides after opening your new spool of line. It’s advisable to thread the fishing line through all the guides on the rod, not just the first one, in my opinion.

running the fishing line through the rod guides

When you start reeling, ensure that you can apply tension to the spool.

Apply tension to the spool of line by holding it between your feet; there’s no need to mount the spool on anything. You can prevent it from moving around by running the line through the first guide near the reel.

2. Thread a piece of fishing line through the spinning reel’s bail and secure it to the spool

Once the fishing line has been run through the rod guides, it can be tied onto spinning reels’ spools. Popular fishing knots like the arbor knot are often used for this purpose.

In this case, you can use any knot; the main goal is to generate friction before you start spooling the line.

Some anglers simply wrap the line around the reel a few times, while others use tape. However, relying solely on a fishing knot may not be advisable if you need to allow a fish to pull out a significant amount of fishing line.

line is just wrapped around the reel

I personally tie a knot every time, often opting for a couple of overhand knots, even though this might be true. After all, it only takes a second to tie a knot.

3. Place the spool on the reel and unwind the fishing line

Make sure the fishing line is attached to the spinning reel correctly. This helps it come off the spool in a straight line when you reel it onto the reel.

Also, make sure your line feeds back onto the reel in the same direction it came from the spool. This helps lessen the chance of wind knots or line twists.

4. Apply tension to the fishing line while slowly reeling it in

Rotate the handle to reel in the line onto the spool. When pulling in the fishing line, hold it with one hand close to the rod guide nearest to the spinning reel, and use your other hand to reel.

handle to reel the line into the spool

When dealing with braided fishing lines, it’s advisable to use a damp towel to protect yourself from cuts or burns.

5. Do not overload the reel

Reel in the line until the spool is filled up to about 1/8th of an inch from the edge. A completely filled spool can lead to wind knots or tangles because the line might jump off too quickly when casting.

spool is filled up to 1/8th  inch from the edge

Starting your next fishing trip with tangled lines won’t make for a pleasant experience!

6. That’s it! Cut the line after tying a lure to it

Once the spool is full, cut the line about 1/8th of an inch from the edge. Make sure your fishing line runs from the spool through the rod guides and the bail’s line roller.

Now that your favorite fishing lure is attached, it’s time to catch some fish!

How To Put New Line On a Spinning Reel?

To spool the spinning reel correctly, it’s crucial to choose the right line. This may involve familiarizing yourself with the basics of fishing lines.

Additionally, consider the line weight based on the size of your spinning reel spool. Different reels come with various spool sizes. Anglers commonly use medium-sized spinning reels.

For a medium-size spool, 12 pounds of line test is recommended, and braided lines are a suitable choice. Follow these steps to put new line on a spinning reel without twisting.

1. Attach The Reel & Rod.

The first step is to connect the spinning reel to the rod, as you can’t spool a spinning reel without attaching it to a rod.

first task to connect it to the rod

2. Connect The Line With The Rod Guide

Insert the braided line through the first guide, which is conveniently located near the reel seat, making it easy to find.

braided line should be entered through the first guide

3. Release The Bail

Open the bail of the spinning reel at this point. While many experienced fishing anglers may skip this step, as they are proficient in spooling a closed reel, it’s still a necessary part of the process for those using spinning reels.

Open the spinning reel's

For better results, it’s recommended to follow these steps. While it may require some creativity for experts, they typically succeed in spooling the reel effectively.

4. Put The Reel Spool On The Line

Attaching a line to the reel is quite simple, requiring a straightforward knot tying method. Start by wrapping the line’s end around the spool twice.

Next, tie an overhand knot to secure the connection. Finally, trim off any excess line. Don’t forget to clean the spool of any old, worn-out line before proceeding.

tie an overhand knot to secure the connection

You can also use the old line to attach your new line, which can make spooling easier.

5. Wind The Line Slowly Onto The Reel

To turn the handle, first, close the bail and attach the line to the spool. As you start cranking, you’ll observe the line wrapping around the spool.

turn the handle

It’s a good practice to keep an eye on the spool to ensure the wrapping is going in the right direction.

6. Check The Orientation Of Your Spool

There is only one correct way to orient a line, while there are three possible orientations. The other two may result in twists. When spooling line onto a baitcaster reel, avoid trying to force the line. With a spinning reel, it’s essential to allow the line to spool naturally to avoid twists.

Some anglers use clockwise or anticlockwise comparisons to explain certain rules, which can be confusing for beginners. The following steps will guide you through the process more clearly.

Ensure the fishing rod is parallel to the ground. Then, position the line spool in front of you, making sure you’re facing either the ground or yourself.

When tension is added to the line, the fishing reel will start cranking. Turn the crank to ten and place the spool on the ground. Lastly, allow the rod to be slack by lowering it down.

Two things might surprise you now. Firstly, there might already be a relaxed loop in the loose fishing line after it’s been lying on the floor for a while. Secondly, if you notice any twisted lines, repeat the same process.

7. Rotate The Reel Until It Is Full

Wrap the entire line around the spinning reel by standing opposite the spool on the floor. Hold the fishing rod parallel to the ground while doing this.

Apply some tension to the line at the first guide of the rod, between the reel and the rod tip. Then, try cranking slowly. Increase the speed gradually until the spool lip is about 1/8 to 3/16 inches away from the rod’s lip.

apply some tension to the first guide of the rod

In this case, clip the line and thread it through a guide on a different fishing rod.

Conclusion

In conclusion, simplifying the process of putting line on a spinning reel for both beginners and seasoned anglers, this covers crucial steps, including choosing the right fishing line, tying knots like the Arbor Knot, and spooling techniques for various line types.

Practical tips are provided to prevent common issues such as overloading the reel and misaligning the spool. It ensures a hassle-free experience by emphasizing proper cleaning and secure attachment of the line. Whether you’re starting out or looking for a refresher, the step-by-step instructions guarantee a well-prepared spinning reel for a successful fishing outing.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top