How To Spool Spinning Reel?

Spooling a spinning reel is a fundamental skill that every angler should master to ensure smooth casting and maximize fishing success. Whether you’re a beginner or an experienced angler, knowing how to spool your reel correctly can make a big difference in your fishing experience.

In this guide, we’ll take you through the step-by-step process of spooling a spinning reel, from choosing the right line to properly loading it onto your reel.

Spooling a spinning reel may seem daunting at first, but with a little practice, you’ll be able to do it quickly and efficiently. By following the steps outlined in this guide, you’ll learn how to spool your reel like a pro, ensuring that your fishing line is properly loaded and ready for action.

So, let’s get started and make sure your spinning reel is spooled up and ready for your next fishing adventure!

This is a comprehensive guide on the topic. 

  • How to spool a spinning reel?
  • How to add line to a spinning reel?
  • How do you put line on a spinning reel?
  • How to load line on a spinning reel?

How To Spool a Spinning Reel?

The following steps describe how to spool a spinning reel:

Step 1. Choosing Your Line

Choosing Your Line

Picking the right fishing line is key for effective fishing.

1. When catching bait with floating lines, it’s recommended to use monofilament lines. Unlike braided lines, which are made of single strands, monofilament lines are stretchy. This stretchiness adds flexibility, which helps prevent the hook from slipping out of the fish’s mouth. Another advantage is that monofilament lines spool easily on spinning reels.

  • Mono lines are also suitable for fishing with jigs and live bait.

2. Fluorocarbon lines are recommended for fishing in calm, shallow waters.

Fluorocarbon lines are highly effective in calm, shallow waters due to their low visibility underwater. While monofilament lines have less stretch, fluorocarbon lines are more resistant to abrasion. Fluorocarbon lines also have a stronger reaction to light bites and bottom contact.

3. Braided line is the top choice for bottom fishing. It’s made from multiple strands of synthetic material, allowing for longer casting distances. This line provides greater strength, and it doesn’t stretch as much, making it ideal for breaking through tough underwater conditions.

  • Be picky about when to use it because it’s easy to see and stays on the surface.
  • Top-water baits are effective because they sink slowly.

Step 2. Loading the Reel

Loading the Reel

1. Check if the reel turns counterclockwise or clockwise. Hold it as if you were fishing – that’s the simplest way to figure it out.

Confirm the reel’s rotation by turning the wheel 2 to 3 times. Spool the line onto the reel in this direction, and when peeling the line off the spool, go in the opposite direction. This ensures the line is loaded onto the reel correctly.

  • Spincasting and baitcasting reels sit on top of the rod, while spinning reels hang down beneath it.
  • Hold the mounting bar with your casting hand’s fingers and reel with your opposite hand when the reel is not attached to the rod.

2. To open the bail, flip up the small handle attached to it. The bail itself is a wire handle that can be opened and closed by flipping it up and down.

Open the bail by flipping it up and close it by lowering it. While doing this, take the opportunity to remove any old fishing line you may find on your spool.

3. Straighten out your line and thread it through the guides on the bottom of the rod. These small circles act as guides for the line. Secure the line to the spool using an arbor knot.

After tying the knot, use line cutters to trim any excess line, leaving at least a 1/4″ (0.64 cm) of the extra line from where you tied the knot.

  • You can also use scissors to cut the line if that’s more convenient for you.
  • Take the standing line and tie an overhead knot around the arbor. After that, wrap the line around the arbor once more.

About 1 inch (2.5 cm) away from the first overhead knot, tie a second overhead knot. Slide both the first and second knots down the standing line toward the spool.

3. Spool Your Reel

Spool Your Reel

1. After closing the bail, place the spool on the ground with the label facing up. This ensures that the line enters the reel correctly. Keep the spool flat on the ground for optimal spooling.

Position the spool so that the lines come off and enter the reel in a similar manner. This helps ensure smooth and consistent line transfer.

  • If the line is twisted or doesn’t align properly, flip the spool over so that the label side faces down.
  • This helps prevent any issues with tangled lines, ensuring a smoother spooling process.

2. Turn the reel handle slowly while holding onto the line. It’s a good practice to gently pinch the line about 12 inches (30 cm) above the reel and then pull it tight. Crank the reel slowly, around 20 times, letting the line glide through your pinched fingers. This helps ensure a smooth spooling process.

After cranking the line, give it a bit of slack to see if it’s twisted.

  • If you notice the line is twisting, take some line off the reel and realign both the reel and the line.
  • When loading your line, use gentle pressure. Failing to do so may lead to tangles later on

3. Load the line by turning the reel handle. Once you’re certain that the line isn’t twisting, continue loading. To ensure the line isn’t twisting, pause every 20-30 cranks and add the line gradually.

  • If you discover a line twist, you might need to restart the process. If you had flipped the spool during the first inspection, straighten out the twist on your spool.

4. When filling a spool, position it about 1/8 inch (0.32 cm) away from its edge. Having enough line ensures you can change lures or clear snags without overloading your reel, regardless of the length of the line you cut off.

  • Don’t fill the spool right to the edge. Putting too little or too much line can cause tangles and make casting hard.

5. Trim the line close to the supply spool using line cutters. Secure the loose end of the line to a lure by leaving a small amount of extra line.

After cutting the free end of the line, you can also use a small piece of tape to cover it and prevent it from unraveling.

  • If you don’t have line cutters, scissors can be used as an alternative.

6. To secure the line on the spool, you can use a lure, a swivel, or a clip at the free end of your line. This prevents the line from slipping through and helps maintain tension.

  • You can also use a rubber band to secure the spool.
  • You can also tie the end of the line around a tab on your spool to secure it in place.

How Much Fishing Line do You Need To Put On a Fishing Reel?

Having too much or too little line on your spool can lead to tangles and twists in the line.

The ideal distance between the rim of a fishing reel and the line on the spool should be 0.3 centimeters when spooling a new line onto a fishing reel. This rule applies without exception.

Line handling instructions are typically provided with every reel. Additionally, spools of fishing line usually range in length from 150 yards (137 meters) to 300 yards (274 meters). Many reel manufacturers recommend spooling with approximately 200 yards (about 183 meters) of line.

Having too much line on your reel can lead to tangled lines and wind knots. It’s best to follow the manufacturer’s instructions and seek advice to avoid these issues.

How Much Long-Lasting Does The  Fishing Line?

The durability and performance of a fishing line depend on factors such as where and how you use it, how you shop for it, and how much strain you put on it before it breaks.

Monofilament lines typically last between two and three years, while fluorocarbon lines can last from 5 to 7 years. Braided lines can last for up to ten years. These are impressive lifespans for fishing lines. For the average angler, switching lines once instead of twice a year is highly recommended.

Monofilament lines can be easily damaged by the sun and typically last only two to three years. Fluorocarbon lines, however, are not affected by sunlight. It’s generally recommended that most anglers replace their line once or twice a year. With proper care, fishing lines can last up to seven years.

Braided lines have a slightly longer shelf life compared to monofilament and fluorocarbon lines. However, like all materials, they can deform if left unused for extended periods. It’s important to replace your fishing line with a new one if you notice any deformations or issues.

It’s important to store your fishing equipment in a safe place to prolong its life. Avoid exposing it to direct sunlight and heat. When disposing of your fishing lines, make sure to do so properly, as they do not dissolve in nature.

Some Tips To Avoid Line Twists and Reel Spooling Problems

Here are some tips for preventing line twists and reel spooling issues:

  • If you have a spinning reel that allows you to close the bail by turning the handle, it’s a good habit to manually close the bail after each cast. This keeps the line tight and free of slack, ready for your next cast.
  • It’s important not to reel against the drag. Instead, you should either loosen the drag until it slips appropriately when a fish pulls, or use the back-reeling technique if you’re worried about the line breaking.
  • After using fluorocarbon, monofilament, and copolymer lines, apply line conditioner to maintain their performance. In subfreezing temperatures, also spray the guides to prevent sharp ice buildup.
  • If you’re unsure about the condition of your line, don’t hesitate to change it. If you notice any twists or memory that affect casting distance or breaking strength, it’s a good idea to re-spool your reel.

You’re the one closest to the fish, so it’s crucial to make sure you’re casting as strong as possible. This helps protect against losing your prized catch, even when using a premium fishing line.

Conclusion

Spooling a spinning reel is crucial for smooth casting and fishing success. This guide covers line selection, proper loading techniques, and maintenance tips. Choosing the right line is key, with monofilament, fluorocarbon, and braided lines each offering unique advantages.

Properly loading the reel involves attention to detail, such as closing the bail manually and avoiding reeling against the drag. Applying line conditioner after use and storing equipment properly can prolong the life of your fishing line. By following these steps, anglers can ensure their spinning reel is spooled correctly for maximum performance on the water.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top